polybar change on old i3 config

README.md

@@ -1,4 +1,5 @@
 # dotfiles
 
 ### TODO
-- Add main polybar file and create bar as needed from modules
+
+- port scripts to use rofi or equiv

arch/i3

@@ -3,6 +3,7 @@ polybar
 feh
 imagemagick
 rofi
+rofi-calc
 mpv
 mpd
 mpc

bin/rofi-files

@@ -1,49 +0,0 @@
-#!/bin/bash
-
-# getting focused pwd
-PID=$(xdotool getwindowfocus getwindowpid)
-child=$PID
-children=()
-while [ -n "$child" ] ; do
-    children+=($child)
-    child=$(pgrep -P $child)
-done
-
-last_ps=$(ps ${children[-1]} | grep -v PID | awk '{print $5}')
-
-if [ "$last_ps" == "tmux" ] ; then
-    current_pane=$(tmux list-panes | grep '(active)' | grep -o '^[0-9]')
-    cwd=$(tmux display-message -p -t $current_pane -F '#{pane_current_path}')
-else
-    cwd=$(readlink -e /proc/${children[-1]}/cwd)
-fi
-
-# change to the directory
-cd $cwd
-files=$(find * -type f)
-
-selection=$(echo "$files" | rofi-dmenu)
-
-# exit on quit
-if [ -z "$selection" ] ; then
-    exit 0
-fi
-
-# grab extension
-extension=$(echo "$selection" | grep -o '.\([a-zA-Z]\+\)$')
-
-# get proper opener
-case "$extension" in
-    '.pdf')     prg="zathura" ;;
-    '.md')      prg="vim" ;;
-    '.png')     prg="feh" ;;
-    '.jpg')     prg="feh" ;;
-    '.jpeg')    prg="feh" ;;
-        *)      prg="xdg-open" ;;
-esac
-
-if [[ "$1" == '-S' && "$prg" =~ [feh|zathura] ]] ; then
-    swallow $prg "$selection"
-else
-    $prg "$selection"
-fi

bin/vpn_status.sh

@@ -0,0 +1,28 @@
+#!/usr/bin/env bash
+
+# checks mullvad status for monitoring in polybar
+
+CONNECTED=$(printf '%s%s' '%{F#0F0}' $(echo -e '\Uf0318')) # green
+DISCONNECTED=$(printf '%s%s' '%{F#F00}' $(echo -e '\Uf0319')) # red
+
+# check that its installed
+if ! command -v mullvad &>/dev/null ; then
+    echo "Seafile not downloaded to device!">&2
+    echo "$DISCONNECTED"
+    exit 1
+fi
+
+# reading vpn status as continous output
+while read VPN_STATUS; do
+
+    VPN_DISCONNECTED=$(echo "$VPN_STATUS" | grep Disconnect);
+
+    if [[ -n "$VPN_DISCONNECTED" ]] ; then
+        # vpn is disconnected
+        echo "$DISCONNECTED"
+        continue
+    fi
+
+    # connected
+    echo "$CONNECTED"
+done < <(mullvad status listen)

gui/i3/base.conf

@@ -53,6 +53,7 @@ bindsym $mod+d exec --no-startup-id rofi-launcher
 
 bindsym $mod+o exec --no-startup-id rofi-files
 bindsym $mod+Shift+o exec --no-startup-id rofi-files -S
+bindsym $mod+space exec --no-startup-id rofi-calc
 
 # setting up a vimscratch pad to use vimwiki
 for_window [instance="todo"] move window to scratchpad
@@ -108,7 +109,7 @@ bindsym $mod+e layout toggle split
 bindsym $mod+Shift+space floating toggle
 
 # change focus between tiling / floating windows
-bindsym $mod+space focus mode_toggle
+# bindsym $mod+space focus mode_toggle
 
 # focus the parent container
 bindsym $mod+a focus parent

gui/i3/desktop.conf

@@ -1,8 +1,8 @@
 include base.conf
 
 # binding workspaces
-workspace 1 output DP-2
+workspace 1 output DP-0
-workspace 2 output DP-0
+workspace 2 output DP-2
 
 # poly bar
 exec_always --no-startup-id polybar-launch.sh desktop-bar

gui/polybar/config.ini

@@ -6,7 +6,7 @@ foreground = #DDD
 primary = #F0C674
 secondary = #8ABEB7
 disabled = #707880
-alert = #A54242
+alert = #A54242S
 
 [section/base-bar]
 ; base bar settings
@@ -46,10 +46,10 @@ inherit = section/base-bar
 ; height
 height = 24pt
 ; modules
-modules-left = xworkspaces focus-fast spotify spotify-len todo
+modules-left = xworkspaces focus-fast spotify spotify-len 
 ;modules-left = xworkspaces spotify spotify-len
 modules-center = weather-desktop
-modules-right = pulseaudio memory cpu temperature eth dev-bat packages seafile calendar-sync bg-selector quotes date powermenu
+modules-right = pulseaudio memory cpu temperature wlan eth vpn dev-bat packages seafile calendar-sync bg-selector quotes date powermenu
 
 [bar/work-bar]
 ; desktop bar config
@@ -59,7 +59,7 @@ height = 18pt
 ; modules
 modules-left = xworkspaces focus-fast
 modules-center = weather-desktop
-modules-right = memory cpu temperature eth seafile bg-selector date powermenu
+modules-right = memory cpu eth seafile bg-selector date-tp powermenu
 
 [module/xworkspaces]
 type = internal/xworkspaces
@@ -303,5 +303,17 @@ type = custom/script
 interval = 600
 exec = printf "%s %s\n" `echo -e '\ueb29'`  `pacman -Qu | wc -l`
 
+[module/vpn]
+; custom vpn script
+type = custom/script
+exec = vpn_status.sh
+tail = true
+
+[module/crypto]
+; custom crypto script
+type = custom/script
+exec = /home/spinach/sb-ticker 20
+tail = true
+
 [settings]
 screenchange-reload = true

meta/configs/fzf.yaml

@@ -2,6 +2,5 @@
   - [cd src/fzf && make install, Building fzf]
 
 - link:
-    ~/.fzf: src/fzf
     ~/.local/bin/fzf: src/fzf/bin/fzf
     ~/.local/bin/fzf-tmux: src/fzf/bin/fzf-tmux

meta/configs/neovim.yaml

@@ -3,5 +3,5 @@
     ~/.local/share/nvim/site: editors/neovim/site
 
 - shell:
-  - command: "cd editors/neovim/site/pack/markdown/start/markdown-preview.nvim/app && if ( -z `ls bin` ) ; then ./install.sh; fi"
+  - command: "cd editors/neovim/site/pack/markdown/start/markdown-preview.nvim/app && if [[ -z `ls bin 2>/dev/null` ]] ; then ./install.sh; fi"
 #- [cd editors/neovim/site/pack/markdown/start/markdown-preview.nvim && yarn install --checkfiles && NODE_OPTIONS=--openssl-legacy-provider yarn build, building markdown preview]

meta/configs/oh-my-zsh.yaml

@@ -2,4 +2,4 @@
   - [bin/oh-my-zsh-check.sh]
 
 - link:
-    ~/.local/share/oh-my-zsh: shells/oh-my-zsh
+    ~/.local/share/omz-custom: shells/oh-my-zsh

meta/configs/scripts.yaml

@@ -8,13 +8,13 @@
 - link:
     ~/.local/bin/ssh_agent_check: bin/ssh_agent_check
     ~/.local/bin/poly_spotify: bin/poly_spotify
-    ~/.local/bin/rofi-files: bin/rofi-files
     ~/.local/bin/i3-scratchpad.sh: bin/i3-scratchpad.sh
     ~/.local/bin/todo_display.sh: bin/todo_display.sh
     ~/.local/bin/display_uptime: bin/display_uptime
     ~/.local/bin/markdown-preview.sh: bin/markdown-preview.sh
     ~/.local/bin/docker_check: bin/docker_check
     ~/.local/bin/seafile_check: bin/seafile_check
+    ~/.local/bin/vpn_status.sh: bin/vpn_status.sh
     ~/.local/bin/watertracker: src/watertracker/watertracker
     ~/.local/bin/device_battery.sh: src/device-battery/device_battery.sh
     ~/.local/bin/weather: src/weather/weather

meta/configs/tmux.sparse.yaml

@@ -1,2 +1,2 @@
 - link:
-    ~/.tmux.conf: terminals/tmux/tmux.sparse.conf
+    ~/.config/tmux/tmux.conf: terminals/tmux/tmux.sparse.conf

meta/configs/zsh.basic.yaml

@@ -0,0 +1,10 @@
+- shell:
+  - command: chsh -s $(which zsh)
+    stdin: true
+    stdout: true
+    stderr: true
+
+- link:
+    ~/.zprofile: shells/zsh/zprofile
+    ~/.zshrc: shells/zsh/zshrc.basic
+    ~/.p10k.sh: shells/zsh/p10k.sh

meta/configs/zsh.yaml

@@ -1,6 +1,9 @@
 - shell:
-  - [bin/zsh-check]
+  - command: bin/zsh-check
+    stdin: true
+    stdout: true
 
 - link:
-    ~/.zshrc: shells/zsh/zshrc
+    ~/.config/zsh/.zprofile: shells/zsh/zprofile
-    ~/.zprofile: shells/zsh/zprofile
+    ~/.config/zsh/.zshrc: shells/zsh/zshrc
+    ~/.config/zsh/.p10k.sh: shells/zsh/p10k.sh

meta/configs/zshenv.yaml

@@ -0,0 +1,2 @@
+- shell:
+    - [echo 'export ZDOTDIR="$HOME/.config/zsh"' > /etc/zsh/zshenv, "creating zshenv"]

meta/profiles/arch

@@ -3,6 +3,7 @@ arch.i3
 arch.nvim
 neovim
 zsh
+zshenv-sudo
 oh-my-zsh
 fzf
 tmux.sparse

meta/profiles/bare

@@ -0,0 +1,5 @@
+tmux.sparse
+zsh.basic
+oh-my-zsh
+neovim
+clean

shells/zsh/zshenv

@@ -0,0 +1 @@
+export ZDOTDIR="$HOME/.config/zsh"

shells/zsh/zshrc

@@ -8,6 +8,13 @@ fi
 export SSH_AUTH_SOCK=~/.ssh/ssh_auth_sock
 ssh-add -l > /dev/null || ssh-add ~/.ssh/id_ed25519
 
+# Path to your oh-my-zsh installation.
+# export ZSH="$HOME/.oh-my-zsh"
+export ZSH="$HOME/.local/share/oh-my-zsh"
+
+# Would you like to use another custom folder than $ZSH/custom?
+export ZSH_CUSTOM="$HOME/.local/share/omz-custom/custom"
+# export ZSH_CUSTOM=$HOME/.local/share/omz-custom
 # Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
 # Initialization code that may require console input (password prompts, [y/n]
 # confirmations, etc.) must go above this block; everything else may go below.
@@ -21,20 +28,23 @@ fi
 # fixing gopath and binaries
 export GOPATH="$HOME/.local/share/go"
 
+# moving cargo cache dir
+export CARGO_HOME="$HOME/.local/share/cargo"
+export RUSTUP_HOME="$HOME/.local/sare/rustup"
+
 
 # Path to your oh-my-zsh installation.
-export ZSH="$HOME/.oh-my-zsh"
+# export ZSH="$HOME/.oh-my-zsh"
+export ZSH="$HOME/.local/share/oh-my-zsh"
 
 # Would you like to use another custom folder than $ZSH/custom?
-export ZSH_CUSTOM=$HOME/.local/share/oh-my-zsh/custom
+export ZSH_CUSTOM="$HOME/.local/share/omz-custom/custom"
-
+# export ZSH_CUSTOM=$HOME/.local/share/omz-custom
-plugins=(
-    zsh-autosugggestions
-)
 
 # ZSH theme
 ZSH_THEME="powerlevel10k/powerlevel10k"
 
+
 # Which plugins would you like to load?
 # Standard plugins can be found in $ZSH/plugins/
 # Custom plugins may be added to $ZSH_CUSTOM/plugins/
@@ -44,8 +54,11 @@ plugins=(
 	zsh-autosuggestions	
 	git
 )
-
+    #vi-mode
 source $ZSH/oh-my-zsh.sh
+# vi-mode settings
+export KEYTIMEOUT=10
+bindkey -v
 # Uncomment the following line to use hyphen-insensitive completion.
 # Case-sensitive completion must be off. _ and - will be interchangeable.
 # HYPHEN_INSENSITIVE="true"
@@ -71,7 +84,7 @@ source $ZSH/oh-my-zsh.sh
 # if [[ -n $SSH_CONNECTION ]]; then
 #   export EDITOR='vim'
 # else
-#   export EDITOR='mvim'
+#   export EDITOR='nvim'
 # fi
 
 # Compilation flags
@@ -82,18 +95,20 @@ source $ZSH/oh-my-zsh.sh
 alias vim="nvim"
 
 
-# helpful aliasis
-#alias ifconfig="/sbin/ifconfig"
-
 # bb ip remove work related
 alias bbrm='ssh-keygen -f "/home/kdeppe/.ssh/known_hosts" -R "192.168.7.2"'
 
 # To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
-[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
+export POWERLEVEL9K_CONFIG_FILE="$HOME/.config/zsh/.p10k.sh"
+
+[[ ! -f "$POWERLEVEL9K_CONFIG_FILE" ]] || source "$POWERLEVEL9K_CONFIG_FILE"
 
 # home and clear
 alias c="cd && clear"
 
+# colorize ls
+alias ls="ls --color=auto"
+
 # water tracking alias
 alias nalgene="water 32"
 alias tt="timetracker"
@@ -114,3 +129,6 @@ alias gadd="git add ."
 alias gbug="git add . && git commit -m 'bug fixes'"
 alias gp="git push"
 alias glog="git log --pretty --oneline --graph --all --decorate"
+
+# copying with progress
+alias cpr="rsync -r -hh --info=stats1,progress2"

shells/zsh/zshrc.basic

@@ -0,0 +1,107 @@
+# Path to your oh-my-zsh installation.
+# export ZSH="$HOME/.oh-my-zsh"
+export ZSH="$HOME/.local/share/oh-my-zsh"
+
+# path fix for deb
+export PATH=$PATH:/usr/local/bin
+
+# Would you like to use another custom folder than $ZSH/custom?
+export ZSH_CUSTOM="$HOME/.local/share/omz-custom/custom"
+# export ZSH_CUSTOM=$HOME/.local/share/omz-custom
+# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
+# Initialization code that may require console input (password prompts, [y/n]
+# confirmations, etc.) must go above this block; everything else may go below.
+if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
+  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
+fi
+
+# If you come from bash you might have to change your $PATH.
+# export PATH=$HOME/bin:/usr/local/bin:$PATH
+
+# fixing gopath and binaries
+export GOPATH="$HOME/.local/share/go"
+
+# moving cargo cache dir
+export CARGO_HOME="$HOME/.local/share/cargo"
+export RUSTUP_HOME="$HOME/.local/sare/rustup"
+
+
+# Path to your oh-my-zsh installation.
+# export ZSH="$HOME/.oh-my-zsh"
+export ZSH="$HOME/.local/share/oh-my-zsh"
+
+# Would you like to use another custom folder than $ZSH/custom?
+export ZSH_CUSTOM="$HOME/.local/share/omz-custom/custom"
+# export ZSH_CUSTOM=$HOME/.local/share/omz-custom
+
+# ZSH theme
+ZSH_THEME="powerlevel10k/powerlevel10k"
+
+
+# Which plugins would you like to load?
+# Standard plugins can be found in $ZSH/plugins/
+# Custom plugins may be added to $ZSH_CUSTOM/plugins/
+# Example format: plugins=(rails git textmate ruby lighthouse)
+# Add wisely, as too many plugins slow down shell startup.
+plugins=(
+	zsh-autosuggestions	
+	git
+)
+    #vi-mode
+source $ZSH/oh-my-zsh.sh
+# vi-mode settings
+export KEYTIMEOUT=10
+bindkey -v
+# Uncomment the following line to use hyphen-insensitive completion.
+# Case-sensitive completion must be off. _ and - will be interchangeable.
+# HYPHEN_INSENSITIVE="true"
+
+# Uncomment the following line if you want to disable marking untracked files
+# under VCS as dirty. This makes repository status check for large repositories
+# much, much faster.
+# DISABLE_UNTRACKED_FILES_DIRTY="true"
+
+# Uncomment the following line if you want to change the command execution time
+# stamp shown in the history command output.
+# You can set one of the optional three formats:
+# "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
+# or set a custom format using the strftime function format specifications,
+# see 'man strftime' for details.
+# HIST_STAMPS="mm/dd/yyyy"
+
+
+
+# export LANG=en_US.UTF-8
+
+# Preferred editor for local and remote sessions
+# if [[ -n $SSH_CONNECTION ]]; then
+#   export EDITOR='vim'
+# else
+#   export EDITOR='nvim'
+# fi
+
+# Compilation flags
+# export ARCHFLAGS="-arch x86_64"
+
+# 
+# switching to neovim
+alias vim="nvim"
+
+# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
+export POWERLEVEL9K_CONFIG_FILE="$HOME/.config/zsh/.p10k.sh"
+
+[[ ! -f "$POWERLEVEL9K_CONFIG_FILE" ]] || source "$POWERLEVEL9K_CONFIG_FILE"
+
+# home and clear
+alias c="cd && clear"
+
+# colorize ls
+alias ls="ls --color=auto"
+
+export FZF_DEFAULT_OPTS='--layout=reverse --border'
+
+# git aliases
+alias gadd="git add ."
+alias gbug="git add . && git commit -m 'bug fixes'"
+alias gp="git push"
+alias glog="git log --pretty --oneline --graph --all --decorate"

terminals/tmux/tmux.sparse.conf

@@ -32,6 +32,18 @@ bind-key a attach -c "#{pane_current_path}"
 # setting up TPM
 set -g @plugin 'tmux-plugins/tpm'
 set -g @plugin 'tmux-plugins/tmux-sensible'
+# adding tmux ssh support
+set -g @plugin 'MunifTanjim/tmux-mode-indicator'
+set -g @plugin 'MunifTanjim/tmux-suspend'
+# suspend key
+set -g @suspend_key 'F12'
+# suspend cutom colors
+set -g @suspend_suspended_options " \
+  window-status-current-style::bg=color94 dim\\,fg=black, \
+  @mode_indicator_custom_prompt:: ---- , \
+  @mode_indicator_custom_mode_style::bg=brightblack\\,fg=black, \
+  status-style::bg=color94 dim\\,fg=black bold dim, \
+"
 
 # clock settings
 set -g clock-mode-colour white
@@ -39,9 +51,11 @@ set -g clock-mode-colour white
 # status config
 set -g status-interval 10
 set -g status-style "bg=black, fg=brightWhite"
-set -g status-right "%a, %b %d %l:%M %P "
+set -g status-right "%a, %b %d %l:%M %P #{tmux_mode_indicator}"
 set -g status-right-length 100
 set -g status-left ""
+# change active window color
+set-window-option -g window-status-current-style "bg=white, fg=black"
 
 # set -g default-terminal "${TERM}"
 # set -as terminal-overrides ',*:Smulx=\E[4::%p1%dm'  # undercurl support
@@ -57,9 +71,10 @@ set -g status-left ""
 # set -g @continuum-boot 'on'
 #set -g @continuum-systemd-start-cmd 'new-session -d -s doormat'
 
+set-environment -g TMUX_PLUGIN_MANAGER_PATH "$HOME/.local/share/tmux/plugins"
 
-# auto install plugins
+# auto install plugins at correct directory
-if "test ! -d ~/.tmux/plugins/tpm" \
+if "test ! -d ~/.local/share/tmux/plugins/tpm" \
-    "run 'git clone https://github.com/tmux-plugins/tpm ~/.tmux/plugins/tpm && ~/.tmux/plugins/tpm/bin/install_plugins'"
+    "run 'git clone https://github.com/tmux-plugins/tpm ~/.local/share/tmux/plugins/tpm && ~/.local/share/tmux/plugins/tpm/bin/install_plugins'"
 # run tpm
-run '~/.tmux/plugins/tpm/tpm'
+run '~/.local/share/tmux/plugins/tpm/tpm'